Beko
Total Heating Failure
Oven does not heat at all; fan and light may work but no warmth in any mode and no error code displayed.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Open safety thermostat, Failed main oven selector switch, Multiple heating elements failed, Faulty main control board power output
How to Fix / Troubleshooting
Safety first: Isolate the oven from mains power before any internal checks.
Step-by-step checks:
- Confirm the clock/timer is set; many Beko ovens will not heat if the timer is not set to manual mode.
- Try different functions (conventional, fan, grill) to see if any element heats.
- Access the top of the oven and test the safety thermostat for continuity; replace if open.
- Check the oven selector switch for burnt contacts or loose spade terminals; replace the switch if it shows signs of overheating or intermittent continuity.
- If all elements and thermostat test good, the main PCB or selector switch is likely at fault and may need replacement.
Warning: Live testing on selector switches and PCBs should only be done by qualified technicians.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Oven Selector Switch
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements