Beko
Selector Switch or Timer Interlock Failure
Oven light works but none of the heating elements operate in any mode; timer display is on.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed oven function selector switch, Timer not set to manual mode, Faulty timer relay contact, Broken wiring between timer and selector switch
How to Fix / Troubleshooting
Safety first: Disconnect power before removing the control panel or knobs.
Checks:
- Ensure the timer is set to manual or continuous mode; if stuck in auto, the oven will not heat.
- Remove the control knobs and front panel to access the selector switch.
- Inspect the switch for burnt or melted contacts; test continuity for each function position.
- Replace the selector switch if contacts are damaged or intermittent.
- If the timer controls power to the oven, test its relay output; replace the timer module if it does not pass power when in manual mode.
Warning: Label all wires on the selector switch before removal to avoid miswiring.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Oven Function Selector Switch
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements