F09
Belling
Clock / Timer Power or Communication Fault
Clock or timer display blank; oven functions disabled on models that require clock setting.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed electronic clock module, Blown internal fuse on clock PCB, Loose power connector to timer, Faulty wiring between timer and main oven switch
How to Fix / Troubleshooting
Safety: Disconnect mains power before accessing the control panel.
- Check supply to cooker: Verify that the cooker isolation switch is on and that other functions (e.g., hob) have power. If only the clock is dead, focus on the timer module.
- Access timer module: Remove the front control panel to expose the clock/timer PCB. Check for a small glass fuse on the board; if blown, investigate for shorts before replacing with the same rating.
- Inspect connectors: Ensure the live, neutral, and communication connectors are firmly seated on the timer module.
- Check for burning: Look for burnt tracks or components on the timer PCB. If present, replace the entire clock module.
- Set the time: After restoring power, set the clock according to the user manual. Many Belling ovens will not heat until the time is set.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Clock / Timer Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements