Belling
Fan Element Failure with Working Conventional Elements
Oven fan runs but there is no heat in fan-assisted modes; conventional heat may still work.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Open circuit fan element, Loose connection at fan element terminals, Selector switch not supplying power to fan element, Faulty relay controlling fan element
How to Fix / Troubleshooting
Safety: Isolate the oven from mains before testing.
- Test fan element: Access the circular fan element behind the rear cavity panel. Disconnect and measure resistance; replace if open circuit.
- Inspect terminals: Ensure the element terminals are tight and not burnt.
- Check selector contacts: Verify that in fan mode, the selector switch supplies power to the fan element. Replace the switch if contacts are faulty.
- PCB-controlled models: Inspect the fan element relay on the PCB and replace the board if the relay has failed.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Fan Oven Element
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements