Rotisserie function does not operate; error indicates rotisserie motor fault (on models equipped).

Safety first: Disconnect power before accessing the rear or side panels.

• Check mechanical setup: Ensure the rotisserie spit is correctly seated in the drive coupling and support bracket, and that it can rotate freely by hand.
• Listen for motor operation: With the oven cool, briefly select rotisserie mode and listen for motor noise. If silent and no movement, turn power off and proceed.
• Access and test motor: Remove the rear or side panel to reach the motor. Measure resistance across the motor terminals; an open circuit indicates a failed motor that must be replaced.
• Inspect wiring and selector switch: Check for loose connectors or damaged wires from the control to the motor. If the motor is good but never receives power, the selector switch or control relay may be faulty.