F0
BlueStar
General Control Board or Keypad Error
Display shows F0 and oven controls may be unresponsive or intermittent.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose keypad ribbon connection, Failing EOC, Power surge or electrical noise affecting control
How to Fix / Troubleshooting
Safety first: Turn off power at the breaker before accessing the control area.
Steps to try:
- Power reset: Disconnect power for 10 minutes, then restore. If F0 clears and does not return, it may have been a transient error.
- Inspect connections: Remove the control panel and check all harness connectors to the EOC and keypad. Reseat each connector firmly.
- Check for moisture: Look for signs of steam or liquid intrusion around the control. Allow the area to dry completely before retesting.
- Replace components: If F0 persists, replace the keypad assembly first if it is separate. If the keypad is integrated or replacement does not help, replace the EOC.
When to stop: If you see burnt wiring or are not comfortable working with control electronics, contact a professional.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Electronic Oven Control (EOC) Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements