Bomann Convection Element Failure

Oven fan runs but no heat is produced in fan-assisted modes, while conventional top/bottom heat works

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Open convection heating element, Burned connector at convection element, Broken wiring from element to control board, Faulty convection relay on main board

How to Fix / Troubleshooting

Safety: Disconnect power.

Steps:

Access the rear of the oven and locate the convection heating element around the fan housing.
Inspect connectors for burning and ensure they are tight.
Measure resistance across the element; replace if open circuit.
Check wiring continuity from the element to the main control board.

Repair Difficulty

Medium 3/5

Required Part

Convection Heating Element

Check Price on Amazon

We may earn a commission from links on this page.