Bush
No Power / Dead Appliance
Bush oven display is blank and oven is completely dead.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown internal fuse, No mains supply at terminal block, Loose neutral or live connection, Failed main control board power supply
How to Fix / Troubleshooting
Safety first: Verify the circuit is dead with a suitable tester before touching any wiring.
- Check external supply: Confirm the wall isolator is on and the breaker or fuse for the cooker circuit is intact.
- Inspect terminal block: Remove the rear cover and check that live and neutral are present and connections are tight.
- Internal fuse: Some Bush ovens have an internal fuse on the control board or wiring harness. Check and replace with the exact same rating if blown, but investigate the cause.
- Control board: If supply is present but the display remains dead, the PCB's power supply section may have failed and the board will need replacement.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements