E09
Caple
Electronic Timer / Clock Module Fault
Caple oven clock cannot be set or loses time; oven will not start because the timer is not correctly set.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed timer module, Stuck or unresponsive timer buttons, Internal clock capacitor failure, Faulty connection between timer and main PCB
How to Fix / Troubleshooting
Safety first: Disconnect mains power before removing the control panel.
- Attempt reset: Restore power and try a full reset by holding the timer buttons as described in the user manual (often simultaneously pressing +/- or mode buttons). Set the time and test oven start.
- Check child lock: Ensure the control lock is not active. Refer to the manual for the specific key combination to unlock.
- Inspect buttons: Remove the control panel and check that the timer buttons are not physically jammed or misaligned. Clean any grease or debris around the button plungers.
- Check wiring: Verify the timer module connectors are firmly seated on both the timer and main PCB. Reseat them.
- Replace timer module: If the clock still cannot be set or loses time rapidly, replace the timer/clock module with a compatible Caple part.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Electronic Timer / Clock Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements