E6
Danby
Temperature Calibration or Sensor Range Error
Display shows E6; oven may not respond to temperature settings.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Sensor reading out of calibration range, Control board firmware error, Loose sensor harness connection
How to Fix / Troubleshooting
Safety First: Disconnect power before testing components.
- Check sensor and harness: Test the oven temperature sensor resistance at room temperature and at a known elevated temperature (e.g., 200 °C if possible). Replace if readings are inconsistent with specifications.
- Inspect harness: Ensure the sensor harness is not pinched or damaged where it passes through the rear of the oven.
- Control reset: Perform a factory reset or calibration reset if available in the user menu.
- Replace control board: If E6 persists with a known-good sensor and wiring, replace the control board.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Oven Temperature Sensor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements