E7
Danby
Door Switch or Door Lock Status Error
Display shows E7; oven may not start or may shut off mid-cycle.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty door switch, Misaligned door latch, Broken wiring to door switch
How to Fix / Troubleshooting
Safety First: Disconnect power before removing door or front panels.
- Check door closure: Ensure the oven door closes fully and evenly. Adjust hinges if the door is sagging.
- Inspect door switch: Locate the door switch (usually behind the front frame where the door contacts). Press it manually and listen for a click. If no click or if loose, replace the switch.
- Test continuity: With power off, remove the switch and test for continuity when pressed. Replace if it does not change state.
- Check wiring: Inspect the harness from the switch to the control board for breaks or loose connectors.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Door Switch
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements