E8
Danby
Convection Fan Motor or Feedback Error
Display shows E8; convection fan may not run or convection mode may be disabled.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed convection fan motor, Obstructed convection fan blades, Faulty fan wiring or connector
How to Fix / Troubleshooting
Safety First: Disconnect power and allow the oven to cool before accessing the rear panel.
- Check fan operation: In convection mode, you should hear the fan running. If silent, suspect the motor or power to it.
- Access convection fan: Remove the rear panel of the oven or the interior rear cover (depending on model) to reach the convection fan assembly.
- Inspect blades: Ensure the fan blades spin freely by hand and are not rubbing against the shroud. Remove any debris.
- Test motor: With power off, disconnect the fan motor and test for continuity. Replace the motor if open or seized.
- Check wiring: Inspect the harness from the control board to the fan for damage or loose connectors.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Convection Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements