Oven display and controls are dead; no lights or response.

Safety First: Work with power circuits only if you are qualified. Always disconnect power before opening panels.

• Check breaker and outlet: Verify that the oven's breaker is ON and that the outlet has power.
• Inspect terminal block: With power off, check the terminal block for loose or burnt connections. Repair as needed.
• Internal fuse: Some Danby ovens have an internal fuse on the control board or wiring harness. Access the control area and check for a small cartridge or glass fuse. Test for continuity and replace only with the same rating.
• Control board: If power is present at the board but it remains dead, the board is likely failed and must be replaced.