Danby
Open Bake Heating Element Circuit
Oven will not heat in bake mode, but broil still works.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Burned-out bake element, Loose or burnt wire at bake element terminal, Failed bake relay on control board
How to Fix / Troubleshooting
Safety First: Turn off power at the breaker before touching any internal components.
- Visual inspection: Remove oven racks and inspect the lower bake element for blisters, cracks, or burn marks. A visibly damaged element must be replaced.
- Test element: Remove the mounting screws and gently pull the element forward. Disconnect wires and test for continuity with a multimeter. Replace if open.
- Check wiring: Inspect the wires and terminals for heat damage or looseness. Repair or replace damaged connectors.
- Control board: If the element and wiring are good but bake still does not heat, the bake relay on the control board may be faulty. Replace the control board.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements