Danby
Open Broil Heating Element Circuit
Oven will not heat in broil mode, but bake still works.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Burned-out broil element, Loose or burnt wire at broil element, Failed broil relay on control board
How to Fix / Troubleshooting
Safety First: Disconnect power before servicing.
- Inspect broil element: Look at the upper element for breaks, blisters, or sagging. Replace if damaged.
- Test continuity: Remove mounting screws, pull the element forward, disconnect wires, and test with a multimeter. Replace if open.
- Check connections: Inspect terminals and wiring for heat damage. Tighten or replace as needed.
- Control board: If the element and wiring are intact, suspect a failed broil relay on the control board and replace the board.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements