Electrolux No display / dead control

Control panel not responding, display is blank, oven has power at outlet

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Blown internal fuse on control board, Failed EOC, Loose ribbon cable to display, Open line filter or power transformer on control

Safety first: Turn off power at the breaker before opening any panels.

Verify supply: Confirm correct voltage at the oven terminal block.
Inspect control area: Remove the control panel and look for an internal fuse on the EOC or power board. Test and replace with the exact type if blown, but also investigate why it blew.
Check connectors: Reseat the ribbon cable between the display and main board.
Replace EOC/UI: If fuses and wiring are good but the panel remains dead, replace the EOC or UI board as per model design.

Hard 4/5

Electronic Oven Control Board (EOC)

Check Price on Amazon

We may earn a commission from links on this page.