Electrolux Convection fan motor failure

Convection fan not running, convection mode ineffective

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed convection fan motor, Obstruction in fan blades, Faulty convection relay on EOC, Open convection element (on some designs)

Safety first: Disconnect power and allow the oven to cool.

Access fan: Remove the rear interior panel to expose the convection fan and element.
Check for obstructions: Clear any debris or buildup preventing the fan from turning.
Test motor: Spin the fan by hand; if stiff, replace the motor. Measure motor resistance and compare to spec; replace if open.
Check convection element: Test for continuity and replace if open.
Control board: If the motor and element are good but never receive power in convection mode, replace the EOC.

Medium 3/5

Convection Fan Motor

Check Price on Amazon

We may earn a commission from links on this page.