E45
Electrolux
Convection or cooling fan feedback fault
Oven displays E45, fan or airflow-related error
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed convection fan motor, Blocked fan blades, Faulty fan speed sensor (if equipped), Wiring issue to fan
How to Fix / Troubleshooting
Safety first: Turn off power at the breaker and allow the oven to cool.
- Inspect fan: Remove the rear panel inside the oven to access the convection fan. Check for obstructions or baked-on debris preventing rotation.
- Test motor: Spin the fan by hand; it should move freely. If stiff or seized, replace the convection fan motor assembly.
- Check wiring: Inspect the fan wiring harness for heat damage or loose connectors.
- Replace motor or sensor: If the fan does not run when commanded and power is present, replace the motor. If equipped with a speed sensor and it tests bad, replace the fan assembly or sensor as designed.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Convection Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements