Oven displays F95, door lock error, often after power interruption during self-clean

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Lock mechanism stuck between positions, Faulty lock position switch, EOC not synchronizing lock state, Wiring harness issue

Safety first: Disconnect power at the breaker.

Manually set lock position: Access the lock mechanism and move it fully to the locked or unlocked position, then restore power to allow the EOC to resync.
Check switches: Verify that the lock and unlock switches show correct continuity in each position.
Inspect wiring: Ensure all lock-related wiring is intact and firmly connected.
Replace lock or EOC: If synchronization fails repeatedly, replace the lock assembly first, then the EOC if needed.

Hard 4/5

Oven Door Lock Motor Assembly

Check Price on Amazon

We may earn a commission from links on this page.