Essentials No Power / Supply Failure

Oven does not heat at all, no lights or display, completely dead

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Tripped household circuit breaker, blown internal mains fuse, loose mains terminal block, faulty mains cable

How to Fix / Troubleshooting

Safety first: Before opening the appliance, ensure the breaker is OFF. Only work on live circuits if you are qualified.

  • Check home breaker: Verify that the oven's circuit breaker or fuse has not tripped. Reset if necessary; if it trips again immediately, stop and investigate further.
  • Inspect mains connection: With power OFF, access the rear terminal block. Tighten all screws and look for burned or melted plastic. Replace the terminal block if damaged.
  • Internal fuse: Many Essentials ovens have an internal fuse near the mains entry or control board. Test for continuity and replace with the exact same rating if blown. Investigate why it blew (shorted element, wiring fault).
  • Check mains cable: Inspect the supply cable for cuts, crushing, or burn marks. Replace if any damage is found.
  • Restore power and test: After repairs, restore power and confirm that the display and oven light come on.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Mains Terminal Block
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements