Falcon User Interface Button / Encoder Failure

Clock and display work but oven will not start; start button appears unresponsive

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Worn start button contacts, Faulty touch panel, Loose fascia ribbon cable, Control PCB input fault

Safety: Disconnect power before removing the control panel.

Check child lock: Ensure any child lock function is disabled according to the Falcon user manual.
Inspect fascia cable: Reseat the Falcon control fascia ribbon cable on both the user interface and main PCB.
Test buttons: If accessible, test the Falcon start button switch for continuity when pressed. Replace the fascia or switch assembly if faulty.

Medium 3/5

Falcon oven control fascia board

Check Price on Amazon

We may earn a commission from links on this page.