F09
Falcon
Clock / Timer Module Fault
Oven clock cannot be set or resets randomly, oven will not start because time is not set
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed electronic clock module, Intermittent power to clock, Faulty clock buttons or encoder, Internal clock PCB fault
How to Fix / Troubleshooting
Safety: Isolate the oven from the mains before removing the control panel.
- Attempt a reset: Turn off power at the isolator for 2–3 minutes, then restore power and try to set the time according to the Falcon user manual.
- Check button operation: If some buttons do not respond, the Falcon oven clock/timer module keypad may be worn. Inspect for stuck or damaged buttons.
- Inspect wiring: Remove the control panel and check the harness between the clock module and main PCB. Reseat connectors firmly.
- Replace clock module: If the clock loses time, resets, or will not accept settings despite good power and wiring, replace the Falcon electronic clock/timer with the correct part number for your model.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Falcon oven clock/timer module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements