Falcon Door Glass Assembly Failure

Oven door glass loose, rattling, or inner glass cracked

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Broken inner glass panel, Loose glass retaining clips, Failed door glass seal, Impact damage

How to Fix / Troubleshooting

Safety: Isolate power and wear cut-resistant gloves when handling glass.

  • Remove door: Open the door fully and release the hinge locks (if fitted). Lift the door off the hinges.
  • Disassemble door: Lay the door on a soft surface and remove screws holding the inner panel. Carefully separate the glass layers.
  • Replace damaged glass: Install a new Falcon oven inner door glass or outer glass as required, ensuring the correct orientation.
  • Reassemble and tighten: Refit all screws and ensure glass is firmly held by the Falcon glass retaining brackets.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Falcon oven inner door glass
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements