Falcon Stuck Door Switch or Lamp Relay

Oven interior light stays on all the time, even when door is closed and oven is off

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Door switch stuck closed, Shorted lamp relay on PCB, Misaligned door not releasing switch, Wiring short in lamp circuit

Safety: Isolate the oven from the mains before testing.

Check door switch: Locate the Falcon oven door switch and test continuity with the door open and closed. Replace if it remains closed in both positions.
Inspect door alignment: Ensure the door fully depresses the switch plunger when closed. Adjust hinges or latch if necessary.
Control board: If the switch is good, the lamp relay on the Falcon control PCB may be welded closed, requiring board repair or replacement.

Medium 3/5

Falcon oven door switch

Check Price on Amazon

We may earn a commission from links on this page.