Frigidaire Professional
No Power to Control Panel
Oven display and controls are completely dead; no lights or response.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped house breaker, Blown internal thermal fuse, Loose power cord or terminal block, Failed EOC
How to Fix / Troubleshooting
Safety First: Verify breaker is off before opening any access panels. High voltage present.
- Check house power:
- Verify the range/oven breaker is ON and not tripped.
- Confirm 240V supply at the outlet or junction box (electric models) using a qualified person.
- Inspect terminal block and cord:
- Remove rear cover and inspect the Terminal Block for burnt connections.
- Tighten screws and replace burnt Power Cord or terminal block.
- Check internal fuse:
- Locate any inline Oven Thermal Fuse or line fuse on the wiring diagram.
- Test for continuity; replace if open.
- Control board:
- If power is present at the EOC but display is dead, replace the Electronic Oven Control (EOC).
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Oven Thermal Fuse
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements