Frigidaire Professional
Self-Clean Will Not Initiate
Self-clean cycle will not start; display may show door locked requirement but door is closed.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Door lock switch not sensing closed, Weak door lock motor, Control board inhibiting clean due to error history, High-limit thermostat open
How to Fix / Troubleshooting
Safety First: Do not bypass safety switches for self-clean; extreme temperatures are involved.
- Check for active errors:
- Clear any existing error codes by power cycling the oven.
- Verify door closure:
- Ensure the door closes firmly and the latch engages.
- Inspect and adjust Oven Door Hinges if door is sagging.
- Test door lock switch:
- Access the Door Lock Motor and Switch Assembly.
- Test continuity of the lock switch when latch is in the locked position.
- Replace assembly if switch does not close properly.
- Check high-limit thermostat:
- Test the Oven High-Limit Thermostat for continuity; replace if open.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Door Lock Motor and Switch Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements