GE Profile
Open bake heating circuit
Broil works but bake does not heat; bottom element stays cold.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed bake element, Burned wire at bake element terminal, Defective bake relay on EOC
How to Fix / Troubleshooting
Safety first: Shut off power at the breaker.
- Visual check: Inspect the bake element for cracks, breaks, or bulges. Replace if damaged.
- Test element: Disconnect one wire and measure resistance (15–40 Ω typical). Replace if open.
- Inspect rear connections: Remove the rear panel and check the element terminals and wiring for burns or loose connections.
- Replace EOC if needed: If the element and wiring are good, the bake relay on the EOC may be faulty.
Warning: Do not operate the oven with exposed or damaged element wiring.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements