F34
GE Profile
Convection fan speed or feedback error
Oven displays F34; often associated with convection fan or speed sensor issues on convection models.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed convection fan motor, Obstructed convection fan blade, Faulty fan speed sensor (if equipped), Wiring issue to convection fan
How to Fix / Troubleshooting
Safety first: Turn off power and allow the oven to cool.
- Inspect fan blade: Remove the convection cover inside the oven (usually a few screws) and check the fan for obstructions, bent blades, or heavy grease buildup. Clean and straighten as needed.
- Check fan rotation: Spin the fan by hand; it should turn freely without grinding. If stiff or noisy, replace the convection fan motor.
- Access motor wiring: From the rear or top, locate the convection motor. Inspect wiring and connectors for damage or looseness.
- Replace motor: If the motor is not running during convection modes or is noisy/binding, install a new GE Profile convection fan motor.
Tip: After replacement, run a convection bake cycle to confirm the error is cleared.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Convection Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements