GE Profile Door glass seal or venting issue

Oven glass door is fogging up excessively or has condensation between glass panes.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Failed inner glass gasket, Blocked door vent slots, Loose inner door panel screws

How to Fix / Troubleshooting

Safety first: Turn off power and allow the oven to cool completely before working on the door.

  • Normal vs. abnormal: Some condensation on the inner surface during cooking is normal. Moisture between glass panes indicates a seal issue.
  • Check door vents: Ensure the door vent slots (usually at the top of the door) are not blocked by foil or grease.
  • Disassemble door: Remove the door (per manual) and separate the inner and outer panels. Clean the glass panes and inspect gaskets.
  • Replace gaskets or door assembly: If the inner glass seal is damaged or not available separately, replace the complete door glass assembly.

Note: Handle glass carefully and avoid overtightening screws to prevent cracking.

Advertisements

Repair Difficulty

Medium 3/5

Required Part

Oven Door Glass Assembly
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements