GE oven shows F9E0 or similar code related to door lock communication

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed door lock motor, Faulty lock position switch, Loose harness connection to control board

Safety first: Disconnect power and let the oven cool.

Check harness: Access the door lock motor and verify the wiring harness is fully seated and not damaged or pinched.
Test lock operation: With the oven reassembled and power restored, start a self-clean cycle and listen for the lock motor. If it does not run or stops mid-travel, the lock assembly is likely faulty.
Replace lock assembly: Remove mounting screws, disconnect the harness, and install the new GE door lock motor assembly. Ensure the latch engages smoothly with the door strike.

Hard 4/5

Oven Door Lock Motor Assembly

Check Price on Amazon

We may earn a commission from links on this page.