E06
Grundig
User Interface to Main Control Communication Failure
Display shows communication error, oven unresponsive or stuck
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose ribbon cable between touch control and main PCB, oxidized connectors, failed user interface board, failed main control board
How to Fix / Troubleshooting
Safety first: Isolate the oven from mains power before removing the control panel.
- Access control panel: Remove the screws securing the front control panel (usually accessible after opening the door). Carefully pull the panel forward.
- Inspect ribbon cables: Check the flat ribbon cable(s) between the display/touch panel and the main control board. Ensure they are fully inserted and not kinked or damaged.
- Clean contacts: Gently clean edge connectors with isopropyl alcohol and a lint-free cloth. Reseat the cables firmly.
- Check for moisture: Look for signs of steam or moisture ingress around the control panel. Dry thoroughly and ensure door seals are intact to prevent future ingress.
- Board substitution: If connections are good but the error persists, either the user interface board or the main PCB is faulty. Replacement typically requires matching the exact Grundig part number and may need programming; consider professional service.
Warning: Do not power the oven with the control panel hanging loose where live parts may be exposed.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements