E14
Hansa
Secondary Heating Element Circuit Fault
Hansa oven shows E14 and some heating modes (e.g., grill or bottom heat) do not work.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Open-circuit grill element, Open-circuit bottom element, Burned wiring to secondary element, Faulty mode selector relay on control board
How to Fix / Troubleshooting
Safety first: Disconnect power and allow the oven to cool.
- Identify non-working mode: Test each heating mode (top, bottom, grill, fan) to determine which element is not heating.
- Inspect the element: Visually check the affected element for cracks or burn marks. Replace if visibly damaged.
- Test resistance: From the rear, disconnect the element and measure its resistance. An open reading indicates a failed element.
- Check wiring and connectors: Repair any burnt or loose connections to the element.
- Control board: If the element and wiring are good but no voltage is supplied in the relevant mode, the control board relay for that element may be defective.
When to call a technician: If multiple elements are affected or if relay-level diagnosis is needed, contact service.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Grill Heating Element
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements