Hansa Convection (Ring) Element Failure

Hansa oven fan runs but there is no heat in fan-assisted modes; conventional modes may still work.

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Open convection/ring heating element around fan, Burned wiring to ring element, Faulty fan-mode relay on control board, Selector switch not energizing ring element

How to Fix / Troubleshooting

Safety first: Disconnect power and allow the oven to cool.

Access ring element: Remove the rear inner panel inside the oven to expose the ring element around the fan.
Inspect and test: Look for breaks or burn marks. Measure resistance; replace the element if open.
Check wiring: Repair or replace any damaged wires to the ring element.

When to call a technician: If the ring element is good but not powered, the control board or selector switch may be faulty.

Repair Difficulty

Medium 3/5

Required Part

Convection (Ring) Heating Element

Check Price on Amazon

We may earn a commission from links on this page.