Hoover oven shows E07 and the fan oven function does not operate correctly.

Safety first: Disconnect the oven from mains power and allow it to cool.

• Check fan operation:
  • Turn the fan blade by hand from inside the oven cavity (after removing the fan cover). It should spin freely without scraping.
  • If it is stiff or seized, the fan motor is likely faulty.
• Access fan motor:
  • Remove the rear panel of the oven to expose the convection fan motor.
  • Inspect the motor and wiring for signs of overheating or damage.
• Electrical tests:
  • Measure resistance of the fan motor windings; an open circuit indicates a failed motor.
  • Check continuity of the wiring harness from the motor to the main PCB.
• Replace faulty fan motor:
  • Remove the fan blade securing nut from inside the cavity and pull off the blade.
  • Unscrew the motor from the rear panel and fit a new Hoover-compatible convection fan motor.
  • Reinstall the fan blade and ensure it is correctly aligned.
• Test: Reassemble, restore power, and select a fan oven function. If E07 persists with a new motor and good wiring, the main PCB may have a defective fan control circuit and should be checked by a technician.