Hoover oven shows E08 and one or more heating functions do not work.

Safety first: Isolate the oven from mains power before accessing any elements.

• Identify which function fails:
  • Note whether the fan oven, conventional oven, or grill is not heating.
  • This helps identify which element circuit is affected.
• Visual inspection:
  • Remove the rear panel and/or inner cavity panels to expose the relevant element(s).
  • Look for visible breaks, bulges, or burn marks on the element.
  • Check for loose or burnt spade connectors.
• Test element continuity:
  • Disconnect the wires from the suspect element.
  • Measure resistance with a multimeter; a good element typically reads between 15–80 Ω depending on power rating.
  • If the element is open (OL), replace it.
• Inspect wiring and terminals:
  • Repair or replace any burnt wires using high-temperature oven cable.
  • Ensure all terminals are tight and fully seated.
• If elements and wiring are OK:
  • The heating relay or triac on the main control board may have failed.
  • Board-level repair or replacement is recommended to be done by a qualified technician.