Hoover oven shows E11 and the grill function does not operate or cuts out.

Safety first: Disconnect the oven from mains power and allow it to cool.

• Access grill element:
  • Open the oven door and remove any top shields to expose the grill element.
  • On some models, the element is accessed from the rear panel.
• Visual and electrical checks:
  • Inspect the grill element for visible breaks or bulges.
  • Disconnect the element terminals and measure resistance; an open circuit indicates a failed element.
  • Inspect wiring and terminals for heat damage and repair as needed.
• Check grill safety thermostat:
  • Locate the thermostat associated with the grill (often on the top of the cavity).
  • Test for continuity; reset if it has a manual reset button, or replace if open and non-resettable.
• Replace faulty parts:
  • Fit a new Hoover-compatible grill element if defective.
  • Replace any failed thermostat.
• If E11 persists: The grill relay or control circuit on the main PCB may be faulty and should be diagnosed and replaced by a technician.