Hotpoint-Ariston
Door Hinge or Hinge Receiver Wear
Oven door will not close fully; heat escapes and cooking is uneven.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn door hinges, Bent hinge arms, Damaged hinge receivers in cabinet, Loose hinge mounting screws
How to Fix / Troubleshooting
Safety first: Ensure the oven is cool. Support the door while working to avoid injury.
Step-by-step checks:
- 1. Inspect hinges: Open the door and check for excessive play or sagging. Look at the hinge arms for bending or cracks.
- 2. Remove door: Engage the hinge locks (if fitted) and lift the door off according to the user manual.
- 3. Check hinge receivers: Inspect the slots in the oven frame where the hinges fit. Look for wear or deformation.
- 4. Replace hinges: Fit new Hotpoint-Ariston oven door hinges in pairs to ensure even closing. Tighten all mounting screws securely.
- 5. Verify seal contact: Refit the door and check that the gasket contacts the frame evenly all around.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Door Hinges
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements