Grill function does not work, oven modes may still operate, error appears when grill is selected

Safety: Disconnect mains power before accessing the grill area or rear panel.

• Check grill element visually: Inspect the grill element at the top of the cavity for blisters, cracks, or burn marks.
• Test grill element continuity: Remove the rear panel to access the terminals. Disconnect the wires and measure resistance across the element. An open circuit means the element has failed.
• Inspect terminals: Look for heat-damaged spade connectors or loose crimps. Replace any burnt connectors and trim back damaged wire.
• Selector switch (if fitted): On mechanical models, test the grill contacts on the function selector switch for continuity when set to grill. Replace the selector switch if contacts are open.
• Control board: If the element and wiring are good but no voltage is supplied in grill mode, the grill relay on the PCB may be faulty, requiring board replacement.