F0E3
Ikea Overcurrent or power supply fault

F0E3 displayed; oven may shut off or not reach set temperature

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Incorrect mains connection (e.g., wrong phase or voltage), Shorted heating element, Damaged wiring harness, Faulty power control board

How to Fix / Troubleshooting

Safety first: This error involves mains power. Turn off the circuit breaker and, if in doubt, contact a qualified electrician or technician.

  • Verify supply voltage: Confirm that the oven is connected to the correct voltage and phase as specified on the rating plate (common Ikea ovens are 220–240 V).
  • Inspect wiring: Remove the rear cover and check the terminal block and main harness for burnt or melted wires.
  • Check heating elements: Disconnect each element and test for continuity to chassis ground. Any element shorted to ground must be replaced.
  • Examine control board: Look for burnt tracks or components on the power board. Replace the board if damage is found.

Warning: Do not continue to reset and use the oven with an F0E3 error; this can pose a fire or shock hazard.

Advertisements

Repair Difficulty

Professional Required 5/5

Required Part

Heating Element (Top/Bottom/Grill) or Power Control Board
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements