F0E4
Ikea
Grill element or relay fault
F0E4 displayed; grill or broil function may not operate correctly
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Open-circuit grill element, Faulty grill relay on control board, Loose wiring to grill element, Overheated terminal connections
How to Fix / Troubleshooting
Safety first: Disconnect power and ensure the oven is cool before accessing the top or rear panels.
- Test grill element: Access the grill element from inside the cavity or from the top. Disconnect its wires and measure resistance. An open reading indicates a failed element.
- Inspect terminals: Check for burnt or loose spade connectors at the element. Replace damaged connectors and ensure a tight fit.
- Check wiring to control board: Trace the wires back to the control board and look for damage or overheating.
- Control relay check: If the element tests good but never heats, the grill relay on the control board may be faulty. Replace the control board if necessary.
Tip: When replacing the grill element, support it properly to avoid bending and ensure it does not touch the cavity walls.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Grill / Broil Heating Element
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements