F0E6
Ikea
Door switch or door sensor fault
F0E6 displayed; oven may not recognize door status correctly
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed door switch, Misaligned door latch, Broken wiring to door sensor, Faulty control input
How to Fix / Troubleshooting
Safety first: Disconnect power before accessing the door switch area.
- Check door closure: Ensure the door closes fully and evenly. Adjust hinges if necessary.
- Locate door switch: On many Ikea ovens, the door switch is near the top front frame. Press it manually and listen for a click.
- Test switch: Remove the switch and check continuity with a multimeter while pressing and releasing it. Replace if it does not change state.
- Inspect wiring: Check the harness from the switch to the control board for breaks or loose connectors.
- Control board: If the switch and wiring are good, the control board input may be faulty and require replacement.
Warning: A faulty door switch can prevent the oven from shutting off correctly; do not bypass it permanently.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Door Switch
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements