Indesit Door Hinge / Door Seal Failure

Indesit oven door does not close fully; heat escapes and front of oven gets very hot.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Worn or bent door hinges, Weak hinge springs, Deformed door seal, Misaligned oven door glass or frame

How to Fix / Troubleshooting

Safety first: Ensure the oven is cool and power is off before working on the door.

  • 1. Inspect door seal: Check the gasket for splits, missing sections, or hardened areas. Replace if damaged.
  • 2. Check hinge play: Open the door halfway and gently lift. Excessive movement indicates worn hinges. Remove the door (usually by opening fully and lifting off the hinge arms) and inspect.
  • 3. Replace hinges: Remove side panels or front trim as needed to access hinge mounts. Replace both hinges as a pair with genuine Indesit parts.
  • 4. Check door alignment: Refit the door and verify it closes evenly against the seal. Adjust hinge mounting screws slightly if necessary to improve alignment.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Oven Door Hinges
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements