Indesit Insufficient Cooling / Door Seal or Fan Issue

Indesit oven knobs become very hot to touch during normal cooking.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Failed cooling fan, Damaged or compressed door seal, Misaligned door allowing heat to escape upwards, Blocked front ventilation slots

How to Fix / Troubleshooting

Burn hazard: Avoid touching hot knobs and surfaces. Allow oven to cool and isolate power before inspection.

  • 1. Check door seal and closure: Inspect the seal and ensure the door closes firmly all around. Replace the seal or adjust hinges if needed.
  • 2. Verify cooling fan operation: During a test (qualified person), the cooling fan should run when the oven is hot. If not, diagnose and replace the cooling fan or its thermostat.
  • 3. Clear vents: Ensure front and top ventilation slots are not blocked by trim, foil, or cabinetry.
  • 4. Installation check: Confirm the oven is installed according to Indesit ventilation requirements. Poor installation can cause excessive front heating.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Oven Door Seal
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements