F5-2
JennAir
Keypad Configuration or Communication Error
JennAir oven displays F5-2, keypad may not respond correctly
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Incompatible touchpad/control board combination, Loose keypad ribbon, Corrupted keypad data
How to Fix / Troubleshooting
Safety: Disconnect power before accessing the control panel.
- Reseat ribbon cable: Remove the control panel and carefully disconnect and reconnect the keypad ribbon cable to the control board.
- Check part compatibility: If either the touchpad or control board was recently replaced, confirm both parts are correct for the JennAir model and are designed to work together.
- Inspect for damage: Look for bent pins on the control board connector or cracks in the ribbon cable.
- Replace faulty component: Replace the touchpad or control board if physical damage or incompatibility is found.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Touchpad / Control Panel Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements