F6
Kenmore
Communication Error Between EOC and Touchpad/Display
Oven displays F6; display may be blank or erratic
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose or damaged ribbon cable, Failed touchpad, Failed EOC display driver
How to Fix / Troubleshooting
Safety first: Turn off power at the breaker before removing the control panel.
- Check ribbon cable:
- Remove the control panel back cover.
- Disconnect and inspect the ribbon cable between the touchpad and EOC.
- Clean contacts with isopropyl alcohol and reseat firmly.
- Visual inspection: Look for cracks or damage on the touchpad and display board.
- Replace faulty component:
- If the display lights but keys do not respond, replace the touchpad / control panel assembly.
- If the display is dead or garbled and power is present, replace the electronic oven control.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Touchpad / Control Panel Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements