Oven displays F92; door remains locked after self-clean or will not unlock

Safety first: Turn off power at the breaker. Allow the oven to cool completely before attempting to unlock the door manually.

• Power reset: After the oven is cool, turn power off for 5 minutes, then back on. Attempt to cancel self-clean and see if the lock releases.
• Manual release:
  • On many Kenmore ranges, you can access the lock rod from the top by lifting the cooktop or removing the back panel.
  • Use a flat tool or your hand to gently move the lock rod to the unlock position.
• Inspect and test lock assembly:
  • Check for binding, bent parts, or broken plastic in the lock mechanism.
  • Test the lock motor and switches with a multimeter; replace the door lock motor assembly if defective.
• Control board: If the lock assembly is good but the EOC never sends an unlock signal, replace the electronic oven control.