F95
Kenmore
Door Lock Circuit Error
Oven displays F95; door lock error often after power outage or during self-clean
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Corrupted EOC logic after power surge, Faulty lock motor circuit, Loose lock harness connector
How to Fix / Troubleshooting
Safety first: Switch off power at the breaker before touching wiring or boards.
- Hard reset: Turn off the breaker for at least 10 minutes to fully discharge the control. Restore power and test. If F95 returns, continue.
- Inspect lock harness: Remove the back panel and verify the lock motor connector is fully seated on both the motor and EOC ends.
- Check for surge damage: Look for burnt traces or components on the EOC near the lock driver circuit. If present, replace the electronic oven control.
- Test lock motor: Measure resistance and verify it is within spec. Replace the door lock motor assembly if open or shorted.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Electronic Oven Control (EOC)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements