Kenmore
Door Hinge / Latch Misalignment
Oven door will not close fully or pops open slightly during baking
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn or bent door hinges, Weak hinge springs, Damaged door latch or strike, Warped oven door
How to Fix / Troubleshooting
Safety first: Ensure oven is cool before working on the door.
- Inspect hinges: Open the door and check hinges for bending, cracks, or loose mounting screws. Tighten screws.
- Hinge test: Lift the door slightly and see if there is excessive play. If so, replace both oven door hinges as a set.
- Check latch and strike: Inspect the latch on the frame and the strike on the door for damage or misalignment. Adjust or replace the door latch/strike if needed.
- Door alignment: If the door is warped, replacement of the oven door assembly may be required.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Door Hinge
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements