La Cornue
Door Alignment / Hinge Failure
Oven door does not close properly; heat escapes and cooking is uneven.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn or bent door hinges, Loose hinge mounting screws, Deformed door seal, Warped door frame from previous overheating
How to Fix / Troubleshooting
Safety first: Ensure the oven is cool before adjusting hinges or seals.
- 1. Inspect hinges: Open the door fully and check for sagging or excessive play. Tighten hinge mounting screws on the door and chassis.
- 2. Adjust or replace hinges: On many La Cornue models, hinges can be replaced as a pair. Remove the door according to the manual and install new hinges if they are worn or bent.
- 3. Check gasket: Inspect the door gasket for flat spots or tears. Replace if it no longer seals evenly around the cavity.
- 4. Verify closure: After adjustments, close the door on a strip of paper at several points around the frame. You should feel consistent resistance when pulling the paper out.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Door Hinge Set
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements