E16
Logik Clock / RTC (Real-Time Clock) Failure

Logik oven shows E16 and the timer cannot be set or loses time rapidly.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Faulty timer module, Internal clock crystal failure, Power supply instability to timer, Damaged control PCB

How to Fix / Troubleshooting

Safety first: Isolate the oven from mains power before removing the control panel.

  • Power reset: Disconnect power for 10 minutes, then restore and set the clock. Observe if it keeps accurate time over several hours.
  • Check for power dips: If the oven is on a circuit with frequent interruptions, consider moving it to a more stable supply.
  • Access timer module: Remove the control panel and locate the timer/clock board. Inspect for corrosion, especially if steam has entered the panel.
  • Replace timer: If the clock continues to lose time or E16 reappears, replace the timer module or the entire control PCB, depending on design.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Electronic Timer Module
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements